hello, every1. in pa design, one of specifications is ruggedness no demage, the typical value is 10:1 & the unit is VSWR, but what meaning the "ruggedness no demage" is ? anybody can explain it for me
When trying to put full power into a load with an SWR of 10:1 at all angles, the amplifier is not damaged and then when putting power into a 1.0 SWR load the performance parameters still meet the specifications.
Under mismatched conditions a strong variation of the voltage and current occurs, due to change of the slope in the load line. The simulator can verify this excursion of voltage and current to see when it pass the breakdown limits.