abhijitrc
Advanced Member level 4
- Joined
- May 22, 2012
- Messages
- 106
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- Bangalore, India, India
- Activity points
- 2,120
What are the major specifications i should consider before started design of a RF front end??
My requirement is 1. 30dB gain from Lnas at 14.5GHz ( so i am planning for three stage!!!)
2.a single balanced mixer(schottky diode based) operating on RF ~ 14.5GHzfor first down conversion and a IF filter ( at 532 MHz)cascaded together.
3. Lo section at 13.968GHz to driver the Lo port of the mixer.LO port consists of doubler with a driver amplifier and the output generated frequency is 13.968GHz
My requirement is 1. 30dB gain from Lnas at 14.5GHz ( so i am planning for three stage!!!)
2.a single balanced mixer(schottky diode based) operating on RF ~ 14.5GHzfor first down conversion and a IF filter ( at 532 MHz)cascaded together.
3. Lo section at 13.968GHz to driver the Lo port of the mixer.LO port consists of doubler with a driver amplifier and the output generated frequency is 13.968GHz