Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

receiver doesn't have enough gain - help needed

Status
Not open for further replies.
S

SamuraiNeophyte

Junior Member level 1
Joined
Dec 9, 2008
Messages
16
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,407
receiver gain

My receiver doesn't have enough gain. I am missing 10dB so I want to put another amplifier after the LNA with at least 10dB of gain. Can I just hook them together in series, or do I need to isolate from each other with a small attenuator? I've heard in series they can cause each other to oscillate?

Thanks for the help
 

Re: receiver gain

If you have decently designed equipment, they will work together without any extra diddling required.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top