Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Rad hardened PLL design ?

Status
Not open for further replies.

xihuwang

Member level 2
Joined
Oct 23, 2007
Messages
46
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,595
radiaion hardened pll

Any body can talk about Rad hardened PLL design ?
Or someone has the papers below ?
Radiation hard PLL design tolerant to noise and process variations
Design of Phase Locked Loops for a Space Radiation Envi-ronment
 

radiation hard pll

Immunity to radiation can be obtained by using passive parts that are amorphous. This means ferrite or air core inductors, glass dielectric capacitors and metal film resistors. JFETS. For ICs there are special processes with higher doping than the usual.
 

Radiation hard designs are classified. I don't think there are many papers on this area.
 

You could just use one of these:

**broken link removed**

I think they are silicon on saphire, which is realtively imune from crystal defects propagating from radiation exposure.

Rich

www.maguffinmicrowave.com
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top