Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pulse shaping of square pulse

Status
Not open for further replies.
S

swaroopsb

Newbie level 1
Newbie level 1
Joined
Aug 8, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india
Activity points
1,287
:lol:I have made a variable width square pulse, width from 12 nsec to 600 nsec. now the voltage level is 3.2V . Vcc is 5V. now how i can increase the level to 5 to 6V so it can be used for my application. can someone suggest some simple circuit. without disturbing the rise and fall time and the width, the pulse rise and fall time is 6 nsec.
 

you will need a level shifter. This can be done with specific circuit or quickswitch and diode.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top