Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

psyn_gui = Fatal: Internal sytem error, cannot recover ????

Status
Not open for further replies.

ByteEnable

Junior Member level 2
Joined
Apr 27, 2001
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
Hi all,

I get the following error whenever I run psyn_gui

psyn_gui = Fatal: Internal sytem error, cannot recover

Funny thing is that it worked before. Its been a while since I powered it up. I dont know what happened. Has anybody seen this before?
design_vision works fine.

Thanks,

Byte
 

CRiSP

Full Member level 2
Joined
May 28, 2001
Messages
122
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
577
Re: psyn_gui = Fatal: Internal sytem error, cannot recover

reinstall
 

ByteEnable

Junior Member level 2
Joined
Apr 27, 2001
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
I've done that - reinstall'ed. I'm running RH 8.0.

Byte
 

kwkam

Full Member level 5
Joined
Feb 25, 2002
Messages
276
Helped
30
Reputation
60
Reaction score
13
Trophy points
1,298
Location
Somewhere on earth
Activity points
1,878
Whats version of physical compiler you use ? It only support redhat 6.2 and support redhat 7.2 if you have patch files.
I have patch my DC and work fine on redhat 7.3
 

ntxp

Member level 2
Joined
May 29, 2002
Messages
44
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
342
yes the 2002.05-1 is patched for redhat 72, and 2002.05 is for redhat 62.
I am searching for 2002.05-4-RH72 which is the latest patch for redhat 72. I did come across the link to 2002.05-4 which is for redhat 62.

ntxp
 

ByteEnable

Junior Member level 2
Joined
Apr 27, 2001
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
I'm running 2002.05-SP2. I was running 2002.05-1. So I downgraded back to 2002.05-1 and still it didn't work. Then I applied 2002.05-SP1, still no workie. For fun I installed 2002.05-4, no workie. Then I reinstalled -1 and applied SP2, still no workie. Same error message:

Fatal: Internal sytem error, cannot recover

:(

Byte
 

kwkam

Full Member level 5
Joined
Feb 25, 2002
Messages
276
Helped
30
Reputation
60
Reaction score
13
Trophy points
1,298
Location
Somewhere on earth
Activity points
1,878
I believe all version of DC only working their GUI on RH6.2. If you need to run on RH7.x, you need to patch it.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top