Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Problem with atlas silvaco(hall conification )

Status
Not open for further replies.

faezehas

Newbie level 2
Joined
May 21, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Hi everybody
I run the example from silvaco website(Hall Voltage for n-type and p-type resistor). But my output is completely different from the picture placed in output results. In my device simulation result there is no Hall voltage (hall1=hall2).
How can I solve this problem?
 

Colbhaidh

Full Member level 6
Joined
Aug 10, 2004
Messages
395
Helped
141
Reputation
280
Reaction score
98
Trophy points
1,308
Location
Scotland
Activity points
3,756
You must be using ATLAS version 5.16.3.R to run this example. Earlier versions may not be able to run it.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top