Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem importing gds file to virtuoso

Status
Not open for further replies.

kpbalusu

Newbie level 1
Joined
Jul 10, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
us
Activity points
1,288
Hi,
I have a problem importing the gds file to cadence using virtuoso. I am able to streamin the gds file and extract it. But when i am creating the netlist it doesnt show the component name in the netlist. It is giving only the parasitics. To be clear i am importing a buffer chain circuit from gds which contains buffer cells. After streaming in i can see the buffer cells in the schematic. So i assume gds file is fine. But after PLS extraction and creating the netlist it doesn't show the buffer cell. It only gives the parasitic capacitances. I dont have the gds file of buffer cell to include.
Thanks in advance
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top