nick703
Advanced Member level 1
Hello Friends ,
I have a Pressure sensor of MEMS 5PSI. below is the datasheet link.
https://www.te.com/commerce/Documen...6CA6pdfEnglishENG_DS_86C_A6.pdf86-005A-C
So my first question is can i provide 5 voltage input throw 3.3Kohm resistor to get 1.5mA curretn source in pin 3 and 2.
or other solution required.
and second question is datasheet mention 100mV output at full span of pin no. 1 and 4. but when i measure i got atmosphere pressure level give me 168mV output.
please give me guide regarding output span.
i have also make circuit using lm324 quad op-amp but circuit didn't give me 3.012V span?
so please help me.
I have a Pressure sensor of MEMS 5PSI. below is the datasheet link.
https://www.te.com/commerce/Documen...6CA6pdfEnglishENG_DS_86C_A6.pdf86-005A-C
So my first question is can i provide 5 voltage input throw 3.3Kohm resistor to get 1.5mA curretn source in pin 3 and 2.
or other solution required.
and second question is datasheet mention 100mV output at full span of pin no. 1 and 4. but when i measure i got atmosphere pressure level give me 168mV output.
please give me guide regarding output span.
i have also make circuit using lm324 quad op-amp but circuit didn't give me 3.012V span?
so please help me.