Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

post-CMOS; bulk micromachining; MEMS

Status
Not open for further replies.

Leonardo888

Newbie level 1
Newbie level 1
Joined
Jul 13, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
Hi everybody!!

I'm a Master of Science student. I have to realize (design) a "smart-chip" which integrates CMOS transistors (to interface a sensor) and a flow sensor (it's an APV - acoustic particle velocity sensor).

I need to know if there are foundries or companies (like Europractice) that offer "CMOS processes + bulk micromachining" to realize transistors and sensor on the same chip.

Thank you.

Leonardo
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top