hrkhari
Full Member level 4
rf pcb design
Hai Folks:
I tested my mixer and QVCO using wafer probing, but whenever I mount it on the PCB (duriod), with off chip balun, the device fails. Can you give me some pointers on RF PCB design and highlight any dedicated steps to test each of the block. Any reading materials would also be appreciated. Thanks in advance
RGds
Hai Folks:
I tested my mixer and QVCO using wafer probing, but whenever I mount it on the PCB (duriod), with off chip balun, the device fails. Can you give me some pointers on RF PCB design and highlight any dedicated steps to test each of the block. Any reading materials would also be appreciated. Thanks in advance
RGds