Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pinout info required....

Status
Not open for further replies.
I

itsfanidotcom

Member level 5
Joined
Mar 9, 2007
Messages
87
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Activity points
1,868
hi there,,
i need to connect the microcontroller 89c51 to the mobile t630 using the serial port of mcu, and serial cable of mobile DCU11 cable...
i need to know which pins of the dcu11 serial cable will be used for Tx and Rx and ground.. and which pins should i make short to avoid handshaking... if anyone know plz contact....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top