Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC 24f16ka102 interrupt and spi problem

Status
Not open for further replies.
P

Psyfusion

Newbie level 5
Joined
Mar 1, 2006
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,349
24f16ka102

Hi!

I'm having a problem with the CN interrupts on the PIC24F16KA102. The interrupt routines work fine in almost any situation except when using SPI. If I enable the SPI module, the CN interrupts don't work anymore. It doesn't matter which pin is used, i've tried all possibilities.
My question is:
- Can I use SPI module and CN interrupts together?
- If yes, what could be the problem with my design? (I'm using simple code copied from the peripheral library documentation examples)

Thanx for your help!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top