Pads for Digital and Analog

[msaadrahman]

I am using a 0.35 um Austrian Microsystems Process. I have a digital part and an analog part in my design. Somebody recommended using BU1P - buffer for signals, GND3ALLP - (GND for Digital Part), VDD3ALLP - (VDD for Digital Part). Could some one recommend a Pad to use for the clock and the input signal, VDD and GND for the Analog component (i.e. ADC).

 

[msaadrahman]

Well I found some answers to my last questions which are posted below. If some one could further verify their utility it would be nice.

BU1P - buffer for signals (Digital Part)
**broken link removed**

GND3ALLP - (GND for Digital Part)
**broken link removed**

VDD3ALLP - (VDD for Digital Part)
**broken link removed**
APRIO200P
**broken link removed**

AGNDALL - (GND for Analog Part i.e. ADC)
**broken link removed**
AVDDP - (VDD for Analog Part i.e. ADC)
**broken link removed**
CORNERP (for Corner Cell)**broken link removed**