Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

OV7955 system control

Status
Not open for further replies.
S

Syafiq87

Newbie level 3
Newbie level 3
Joined
Sep 26, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
21
Hi guys

I just started to program EEPROM , however the OV7955 system control start with [0x0100 - 0x3043]
during program, do i need to start from 0x0000 or 0x0100??
 

The first lines of the final code will be initializing all the devices that are connected to the processor.Only after the devices have been initialized,the data transfer from the connected devices can be initiated.So I would say,you start from 0x0100.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top