As the datsheet reveals, the said "IC" is containing nothing but a LC delay line. Of course you can assemble it from discrete inductors and capacitors as well.
Using less than 10 LC elements is possible, but reduces the cut-off frequency.
Z = √(L/C), TD = √(L*C)
P.S.: You get 1.5 uH + 270 pF for a 20 ns 75 ohm element, which are reasonable values for discrete chips. The end capacitors should be about half the value.
Did you check as to what number of pins is on the S-video connector on your equipment? The 7 pin type may or may not contain audio.
Your pic shows as beautiful an image as I ever got with my VIC20 or C-64. On a tv or a monitor.
I say beautiful because I remember having to put up with rf herringbone interference for years. Until I got a 1701 Commodore monitor. It made about as nice an image as you posted.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?