Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need Matlab program for antenna simulation

Status
Not open for further replies.

star22

Member level 2
Joined
Feb 19, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,588
hi freinds
i need program with matlab for antenna simulation that in first of program get "L" and give "E" and "H" and drawing "E" and "H" and get "f" and give antenna pattern 1D and 3D and get maximum input current (phase and amplitude) and give "radiated resistance" and directivity and drawing current of antenna . and if move feeder from middle of antenna to desire point all above parameters calculate again.
please guide me
thank you for your help
 

star22

Member level 2
Joined
Feb 19, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,588
with matlab

hi freinds
can anybody guide me in " move feeder from middle of antenna to desire point all above parameters calculate again"
thank you
 

woshifanka

Full Member level 1
Joined
Jun 13, 2005
Messages
97
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
2,145
with matlab

yes, it's a good book writen with Matlab code,which you can use pde toolbox(2D) or matlab code(2 or 3D) to draw antenna model, it is based on RWG .
but it is so hard to use matlab to draw a complicated antenna model.
 

star22

Member level 2
Joined
Feb 19, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,588
with matlab

hi freinds thanks for your attention
i have the program for this project but it is not full
and it has not " if move feeder from middle of antenna to desire point all above" i upload it 1.5kbyte
http://rapidshare.de/files/10323367/Antenna.m.html
please guide me for improve its
thanks
 

star22

Member level 2
Joined
Feb 19, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,588
with matlab

i read book about matlab and of course Em modeling but this book"em modeling" is for professional purpose but i need elementry guide :HOW CAN WRITE PROGRAM WITH MATLAB if move feeder from middle of antenna to desire point all PARAMETERS FOR ANTENNA CALCULATED?
PLEASE GUIDE ME THAT IS VERY IMPORTANT
WITH THANKS FOR YOUR ATTENTION
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top