Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need informations for matched impedence

Status
Not open for further replies.

pergassus

Newbie level 5
Joined
Aug 3, 2010
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
canada
Activity points
1,352
Hi every body

I work in conception of Four (04) Dielectric resonator antenna array and to excite theme, I need to cut the micristrip line in Two to have the T jonction. my problem is in the matched line because in my knowledge, when the line is divised, the outer impedence is 2x the inter ones (if 50 ohm, the outer impedence is 100 Ohm) but I have read a paper of Drossos who have disign an antenna of 4 DR and when he matched the line, the outer impedence is 25 ohm so he used the quartwavelengh transformer of Z0=35.35 ohm. so please which of the two information is truth? mine or of Drossos?
I hope thAT YOU READ MY QUESTION AND ANSWER ME.

Thank<s
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top