Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help with designing a domino logic

Status
Not open for further replies.

electim2004

Member level 1
Joined
Apr 17, 2005
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,493
domino

how to design
two input and+two input or+two inputnand with domino.(this gates are cascade)
two input or+two input and+two input nor with domino.this gates are cascade
thank you.
 

shiva

Junior Member level 3
Joined
Oct 18, 2005
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,549
Re: domino

as domino logic is nothing but dynamic logic with cascaded inverter so simply draw an nmos logic stucture for your required gate put it between an pmos as precharge transistor and an nmos at lowest level conected to ground then put ainverter as in at the point between pmos and your nmos logic structure take output from here.even though if u r confused go for book by kang on cmos vlsi design .
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top