Multilayer pcb design for omap3530 dsp

Status
Not open for further replies.
N

nba83

Junior Member level 3
Joined
Apr 9, 2006
Messages
30
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,494
hi
I want to work on a PCB for OMAP3530 dsps at 450mhz, i am not familiar with the tips i should be aware of in designing boards at such frequency speeds, were should i start, which CAD software is suitable,...
any help would be appreciated
 

Have a look at this thread its got some good links, and is discussing the signal return current which at 450mHz will be of major concern for your design.
https://www.edaboard.com/threads/165517/#post864963
I will try and find other high speed links later, though I think it would be a good idea to have a stick thread where we can all collectively place our high speed links.
There are also a couple of threads on DDR memory where a lot of high speed design criteria is discussed.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…