Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I dont know exactly what do you want, hope it is what you are searching for :
An EPLD/MPLD usually comprises programmable RAM and this forms the line memories for temporary storage of the data being compared, and for the determination of the coordinates of the picture. In addition, the EPLD/MPLD provides means for integrating over all luminance values in the window being detected to determine the display load. This indicates whether the picture is video or photographic material (sufficient colors should be present) and will determine the enhancement factor and whether enhancement is to be implemented.
The EPLD/MPLD communicates with a microprocessor in which the intelligence is located to select the required window from the data processed in the EPLD and to determine the gain factor. The required gain is then supplied to video amplifiers to enhance the input video signal RGB as required.
The incoming video signal RGB may alternatively be converted to a luminance signal and then converted to a digital luminance stream for processing via the EPLD and microprocessor.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.