Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] [moved] Target library does not contain an inverter in Design Compiler?

Status
Not open for further replies.
M

mumichang

Newbie level 4
Joined
Jul 28, 2018
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
42
Hi.

I used new db files from TSMC standard cell library, but I got the following errors. Literally, the db files I included may not have the inverter, but I did not get it because it is db files from foundary. Can this be due to some configuration issues? I have successfully used other TSMC libraries before.

"Error: The target library does not contain an inverter. An inverter is required for mapping. (OPT-101)"

Thanks.
 

Re: Target library does not contain an inverter in Design Compiler?

mumichang said:
Hi.

I used new db files from TSMC standard cell library, but I got the following errors. Literally, the db files I included may not have the inverter, but I did not get it because it is db files from foundary. Can this be due to some configuration issues? I have successfully used other TSMC libraries before.

"Error: The target library does not contain an inverter. An inverter is required for mapping. (OPT-101)"

Thanks.
Click to expand...

You probably pointed to the wrong library.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top