Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] [Moved] can lm7805 be used for electrical isolation

Status
Not open for further replies.

at89atbits

Member level 1
Member level 1
Joined
Sep 20, 2014
Messages
35
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
353
Hi,
i need to provide electrical isolation from the power supply network in my design.
however i am powering the circuit from usb port of laptop.
so even then is electrical isolation necessary?
can a normal voltage regulator such as lm7805 be used for such purpose?
 

hi,
LM7805 does not provide any isolation .The cip is a series voltage regulator. What do you isolate from what ? If you power your circuit from 220 or 110 ac. you use a transformer. If you use your laptop, there is no need for that , you can use the 5Vdc from the usb port. Just be careful to not overload it (& of course no short circuit, the port is protected , but still... ). The charger of your laptop provides all necessary safety requirements.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top