Mar 7, 2019 #1 Z Zak28 Advanced Member level 2 Joined Aug 19, 2016 Messages 579 Helped 6 Reputation 12 Reaction score 6 Trophy points 18 Activity points 4,681 if a mosfet drain is switching 200hz-800khz at 400v 8-9 amps pulsed (1.5amps average) and is soldered right onto a large drain copper pour >20mm^2 will it emanate a lot of emi and even damage onboard components?
if a mosfet drain is switching 200hz-800khz at 400v 8-9 amps pulsed (1.5amps average) and is soldered right onto a large drain copper pour >20mm^2 will it emanate a lot of emi and even damage onboard components?
Mar 7, 2019 #2 ArakelTheDragon Member level 3 Joined Jul 9, 2017 Messages 58 Helped 8 Reputation 16 Reaction score 7 Trophy points 8 Location If you like the post, please press "Like". Activity points 350 800kHz is a lot, its close to a megahertz. The load type also matters.You have to apply the proper techniques and change the PCB layout. 0. Guide. 1. Basics. 3. Tips. 4. Example.
800kHz is a lot, its close to a megahertz. The load type also matters.You have to apply the proper techniques and change the PCB layout. 0. Guide. 1. Basics. 3. Tips. 4. Example.