Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
if a mosfet drain is switching 200hz-800khz at 400v 8-9 amps pulsed (1.5amps average) and is soldered right onto a large drain copper pour >20mm^2 will it emanate a lot of emi and even damage onboard components?