Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Mini usb with PIC16F877A

Status
Not open for further replies.

awsikar

Newbie level 6
Joined
May 3, 2007
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,365
pic16f877a usb

Hi,
anyone knows how to interface a mini usb to pic16f877a?
Do I require additional usb ics as such?
I'm quite confuse over the connections to the chip
 

pic16f877 usb

u mean by "mini usb" a flash memory?
 

usb pic16f877

Hi guys,

think I didn't post my qns properly.. Here goes:

Anyone knows how to interface a 4-pin mini usb jack connector to pic16f877a?
Do I require additional usb ics like for in the case of serial port using a max232?
I'm quite confuse over the connections to the pic chip..
 

how to interfacing usb with pic16f877a

USB to serial...

**broken link removed**
 

how to interface usb with pic16f877

16f877 cannot be directly connected to a usb if you want to connect it then you need to convert USB to serial using a converter chip such as FT232 from FTDI or you may use a microcontroller with built in usb interface such as 18f2550 and 18f4550.
 

pic16f877 usb interface

hey guys,
thankz for the prompt reply.. i guess as much the expected answers..

one more qns:
Is it really necessary to have a USB protection IC for the usb port? Can I omit it during my design?
 

usb in pic16f877

awsikar said:
one more qns:
Is it really necessary to have a USB protection IC for the usb port? Can I omit it during my design?

what do you mean by that? what ic are you refering to? if you are reffering to ft232 ic it is not just a protection ic but a signal/protocol converter too.
 

pic16f877a usb

i do not have any particular IC in mind.
Maybe talk about USB6B1 (usb protection IC). Is it necesaary to include this for the UBS port?
 

pic16f877 board usb

Hi,

Try this link
Pic + USB Host

**broken link removed**.

Fuji
 

usb on pic16f877

Thankz for the link...
but too bad, I can't read french.. ;)
 

pic16f877a controller usb

Thankz for the link...
but too bad, I can't read french.. ;)
 

pic16f877a with usb

Thankz for the link...
but too bad, I can't read french.. ;)
 

pic16f877 to usb interface

Then try here instead
**broken link removed**
 

usb interfacing with pic16f877a

try this link

**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top