Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Microstrip stripline how to implement and design?

Status
Not open for further replies.

electronicman

Member level 3
Joined
Nov 7, 2004
Messages
60
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
476
Hi

I am newbie in the microwave stuffs and I want to improve my skill on this.I don't
have many things in my homelab ,so that I need to know how can I design electronic circuits using Microstrip for microwave purposes .also, is the microstrip layout board like the ordinary Copper Clad double-layered or what .Which PCB I must buy to implement those things of microwave stuffs in home (homebrew).Thanks
 

zefreh

Junior Member level 3
Joined
Oct 1, 2005
Messages
25
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,283
Activity points
1,439
Hi
if you want to design a microstrip board you mast know that the configuration of high frequency boards is similar to that of ordinary boards but there is some differentse:
1) in these boards surface must be very smooth.
2)Board dielectric must have a uniformly distribution.
3)loss tangant of dielectric must be small.
4)microstrip sizes must be precise.
5) ...

Added after 1 minutes:
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top