thanks it really helped a lot
one more thing is there any book or paper where i can learn about wat type of boundaries and excitations should i use at different conditions
why do you need only hfss v13 tutorial. you can have tutorial of other version also e.g version 11 also.does anyone has hfss 13 tutorials
i used a lumped port for the exitation
my problem is that when i use a power of 1w as source i find in result
incident power = 5.74
accepted power = 0.17
radiated power is 0.06
the obtained gain is 0.45
and the directivity is 4.82
hy for all I'm trying to simulate rfid microstrip antenna with complex input impedance witch 25.5 +145*j
i used a lumped port for the exitation
my problem is that when i use a power of 1w as source i find in result
incident power = 5.74
accepted power = 0.17
hi, how can i define the input power as 1W or some other number in hfss, thanks.
radiated power is 0.06
the obtained gain is 0.45
and the directivity is 4.82
i can't find out the sollution pleeaze does any one now about this
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?