Methods for shorting the patch and the ground plane

Status
Not open for further replies.
A

abhaykotnala

Junior Member level 1
Joined
Sep 21, 2008
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,402
i want to short the patch and the ground plane if i do so by uniting all the ground plane shoring cylinder and patch it gives error patch and substrate intersect.......bt if i only make the cylinder just touching the patch and ground plane it dsnt give error


is this right method of shorting or is it necessary to unite them.....plzzzz suggest some possible solution to it in regard to hfss
 

Re: shorting pin

There are several options to get connectivity between shorting pin and ground plane:
In case they intersect:
1) Substract short pin from ground plane (save the original shape option has to be selected)
2) unite them

In case they don't intersect just leave them as they are, but you have to verify that
are touching each other (same z-coordinate..)

It doesnt mind for HFSS which option you will choose
Good luck
 

Re: shorting pin



what do you mean by "(save the original shape option has to be selected)"?
I've the same problem and I don't know how to solve it..... I'm getting desperate. Thanks
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…