Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Measure 5-Port Device with a 4-Port Network Analyzer

Status
Not open for further replies.
SeriousTyro

SeriousTyro

Member level 2
Joined
Apr 5, 2010
Messages
49
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,620
Hi all,

I am going to be measuring a 5-port multiplexer in the future and wanted to confirm my process with the gurus.

I only have access to a 4-port network analyzer so my thoughts are to measure the DUT 5 times to get all possible combinations.

Then post-process the 5 files, combining into a .s5p file.

Thoughts?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top