Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Matlab debugging of dsPIC C code ???

Status
Not open for further replies.

epp

Full Member level 5
Joined
Mar 4, 2004
Messages
243
Helped
12
Reputation
24
Reaction score
4
Trophy points
1,298
Activity points
1,847
dspic matlab

Hi.
I have to realise HW controller for AC machine using dsPIC30Fxxxx DSC.
Connection with PC would be by USB. I have to use USB UART chip FT232BL
(serial, 1,875Mbaud at 30MIPS) for as interface between DSC and PC.
Matlab would be used as debbuging tool in order to speed and simplfy C code
development.

I do not know how much spped I need within USB communication in order to manage this task in
real-time. Let me know please. I cannot use USB FIFO (parallel, full usb speed) because I do not have enough free pins at DSC.

Suggest some literature for this kind of problem also for Matlab tool.
I've never worked with this kind of problems.
Thanks.
Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top