Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Matched voltage of Thermoelectric gen TEG

Status
Not open for further replies.
E

engineer1000

Advanced Member level 4
Joined
Aug 16, 2012
Messages
106
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,060
I am now really confused. I have a teg data sheet that gives the matched voltage as 5.26 and the matched current of 0.76 with a matched load resistance of 6.9R. This is were I'm confused. If I draw a model with a voltage source Vmatched a source resistance Rs and load resistance RL. The total matched resistance is 5.26v/0.76a giving Rtotal as 6.9R.
Now surely RL is Rtotal/2 ??? (Rsource + Rload)/2 to get RL then P= I2 RL.
The data sheet gives pmatched as I2 Rtotal
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top