Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Main LVS results different from calibre LVS

Status
Not open for further replies.
A

Ali263

Member level 1
Joined
Aug 21, 2020
Messages
40
Helped
0
Reputation
0
Reaction score
1
Trophy points
6
Activity points
450
I have designed a mixed signal design and its drc and lvs are all clear. However, when I run the pex, it gives me error- LVS Completed - INCORRECT

Netlisting failed because terminal 'VSS!' specified in placed master 'Layout_ff/1_Channel_ff/symbol'
does not exist in switch master 'Layout_ff/1_Channel_ff/calibre.


VSS! is present in layout, its lvs is clear, what can be the reason?
 

Sort by date Sort by votes
Make sure you are using the same settings for PEX as that of the lvs settings.
 

Upvote 0 Downvote
AMS012 said:
Make sure you are using the same settings for PEX as that of the lvs settings.
Click to expand...
Ok I have thought about it and tried it. I will go to Pex- LVS Options anf check that setting? is that all?
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top