Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for some resources about DSPIC

Status
Not open for further replies.

sivaganapathy

Newbie level 1
Joined
Aug 8, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,291
i m final year student, my thesis is about DSPIC.
but i don,t now where to start. can any one help me?
i have started using MPLAB. but i don't have idea what project i want to do using DSPIC.
do u have
- any suggestions
- any web site can guide me(besite microchip)
i need a guide. help me. 10q.
 

blueroomelectronics

Advanced Member level 5
Joined
Sep 17, 2006
Messages
1,686
Helped
179
Reputation
356
Reaction score
77
Trophy points
1,328
Location
Toronto, Canada
Activity points
8,700
slave spi dspic30f

If it's your first PIC you've picked a fairly advanced family. It is designed for C and not an entry level PIC. Better off trying to learn 18F or 16F PICs then moving to a dsPIC.
 

Fernando Vasquez

Junior Member level 3
Joined
Dec 11, 2007
Messages
30
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Location
Peru
Activity points
1,420
kalman for dspic

Buy a book about dsPIC, if you don't know enough about dsPIC you can buy an evaluation board from microchip, there is a lot of projects of Micrhochip, seek the applications notes.
 

funnynypd

Banned
Joined
May 9, 2007
Messages
437
Helped
48
Reputation
100
Reaction score
25
Trophy points
1,308
Location
USA & Canada
Activity points
0
dspic spi interrupt

there are lots of dspics, just pick one and start.
 

hugo

Full Member level 6
Joined
Dec 31, 1999
Messages
323
Helped
49
Reputation
98
Reaction score
23
Trophy points
1,298
Location
canada
Activity points
2,161
Re: Help me - DSPIC

sivaganapathy said:
i m final year student, my thesis is about DSPIC.
but i don,t now where to start. can any one help me?
i have started using MPLAB. but i don't have idea what project i want to do using DSPIC.
do u have
- any suggestions
- any web site can guide me(besite microchip)
i need a guide. help me. 10q.

This could be the best place to start learning about DSPIC :

http://www.mikroe.com/en/books/dspicbook/00.htm
 

vandelay

Advanced Member level 4
Joined
Aug 16, 2007
Messages
119
Helped
6
Reputation
12
Reaction score
4
Trophy points
1,298
Location
Norway
Activity points
2,351
Re: Help me - DSPIC

sivaganapathy said:
i m final year student, my thesis is about DSPIC.
but i don,t now where to start. can any one help me?
i have started using MPLAB. but i don't have idea what project i want to do using DSPIC.
You will write your thesis on dsPIC or you are looking for a final project that can use dsPIC? Usually, the approach is to decide on a project, then explore requirements, and choose a microprocessor/microcontroller/DSP accordingly..

What kind of final year student are you? I have used a range of the dsPIC chips for less demanding Kalman filters, for instance I ran a 6-state augmented extended Kalman filter with 400Hz update rate using single percision floating point calculations, and that was in addition to oversampling and digital filtering of 10 analog channels using A/D interrupt plus SPI communication using interrupt (dsPIC running as SPI slave).. ...Just to give an idea of what power these devices can deliver when pressed to the max.. They are nice devices for their use, but I really think you are starting in the wrong end of things by selecting chip before you select project, especially on a final year thesis..

I found it very easy to learn and understand dsPIC but I had PIC18 with MPLAB on school and it was very similar to dsPIC with MPLAB despite their differences...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top