Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Lens for power LED question

Status
Not open for further replies.

Ronnie

Junior Member level 1
Joined
Sep 25, 2005
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,403
Hello,
I am looking for a lens to install on a power LED inteded for flash lightning for cmos camera(such as cree or luxeon).
I found some lenses for this porpuse, but they are all too large (20mm diameter).
Can anyone reccomend such a lens with smaller diameter (10mm~)?
 

Have you thought about using a light pipe or making your own out of high quality plastic
 

I thought about it but I would rather buy a lens, that will save me time on this project
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top