LCD module selection issue

Status
Not open for further replies.
M

madokaaukawa

Newbie level 6
Joined
Mar 11, 2010
Messages
13
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Location
Toronto
Activity points
1,370
I am selecting LCD module for my project. However, I found some module: 96x64graphic, 84x24graphic, 8char x 2row. However, those module requires supply current 180uA above. In my project, the maximum average current is only 80uA. Is any LCD module only drive tens uA and also have 8char with 2rows or more. anyone can give me an advise that would be grateful.

Thanks in advance
 

Hi,

Think you need to trawl though the lcd datasheets from some of the big suppliers like Digikey.

Perhaps also look at Microchips site and the eXteme Low Power chip section, there might be mention of a suitable low power display there.
 

wp100 said:
Hi,

Think you need to trawl though the lcd datasheets from some of the big suppliers like Digikey.

Perhaps also look at Microchips site and the eXteme Low Power chip section, there might be mention of a suitable low power display there.
Click to expand...


Hi,

Thank you for advise
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…