Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

layout handle command

Status
Not open for further replies.
B

bjic

Newbie level 5
Joined
Oct 30, 2007
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
Anybony could help me where i could find the handle commands of layout in details?
thank you in advance
 

what's wrong?
My question does't be in focus ?
 

I can not understand what you need and which layout editor are you using ?
 

ok.
i'm sorroy, i need some layout editor as follows:
1. array cell
2. turn in horizontal and vertical when i copy and move
3. how could i do 45 and any angles path
4. logo
5. how can i set up "calibre" on the menu banner
ths,my email=bj.ic@hotmail.com

Added after 5 hours 43 minutes:

now ,i have resolved Q:3.
the answer is leSetFormSnapMode(\"diagonal\") 45
leSetFormSnapMode(\"orthogonal\") 90
leSetFormSnapMode(\"anyAngle\") any angles
i will try my best to settle the rests.
If you know please tell me the answer!
ths!
 

now ,i have resolved Q:3.
the answer is leSetFormSnapMode(\"diagonal\") 45
leSetFormSnapMode(\"orthogonal\") 90
leSetFormSnapMode(\"anyAngle\") any angles
i will try my best to settle the rests.
If you know please tell me the answer!
ths!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top