Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing with CSTN LCD Module Help

Status
Not open for further replies.

kevins963

Newbie level 4
Joined
Aug 18, 2006
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,345
I am trying to interface with the Varitronix COG-C144MVGL LCD module which uses the Ultrachip UC1697A LCD Controller/Driver. I tried finding the command set in the datasheets for both parts, they do not seem to have any application notes that tells you how to use the module or the command table, such as setting cursor, clearing screen, initializing, shutting down, etc. Has anyone used this module or able to provide some information on how to use this module.

Any help appreciated.

Thanks
 

pig

Newbie level 1
Joined
Nov 17, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Try this link:s6b33bc.c - tc35i MOBILE phone CIRCUITtc35i MOBILE p - Source Codes Reader - HackChina.com
All you need is information about a controller used in this lcd.
The only thing:
change :
cDispWrCmd(DRIVER_OUTPUT_MODE_SET); //set the display duty to be 1/162 matching the LCD panel
cDispWrCmd(0x25);
to:
cDispWrCmd(DRIVER_OUTPUT_MODE_SET); //set the display duty to be 1/162 matching the LCD panel
cDispWrCmd(0x02);
and play with contrast (normal=0x30)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top