Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

interface circuit for connecting sht75 to 89c51?????

Status
Not open for further replies.
M

marthamaheswar

Newbie level 1
Joined
Sep 25, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
sht75 interface

i need typical interface circuit for connecting the sht75 smart temperature and humidity sensor.
 

sht75 example

The SHM75 sensor belongs to the I2C family and as a such needs two lines to connect with a microcontroller: SCK(clock) and SDA(data) .. see picture below ..
As you intend to use 89C51 you can select virually any two pins, for example P1.0 and P1.1 ..
Some designers use pins from P0 port because of their Open Drain configuration ..
Keep in mind that both lines require 10kΩ pullups ..

More info and examples:
**broken link removed**

Regards,
IanP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top