Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Intel 3G CPU real work on 3GHz ???

Status
Not open for further replies.

andy2000a

Advanced Member level 2
Joined
Jul 18, 2001
Messages
597
Helped
14
Reputation
28
Reaction score
8
Trophy points
1,298
Activity points
5,298
Have anyone know Intel /AMD CPU design ? use CMOS 0.13um process
how to 3GHz clcok ? or real clock is 1.5GHz use rise/fall edge trig on ALU?
or use 750MHz dual clock * 2 edge on ALU ??
I ever heard Via CPU use "static CMOS cell" in 0.13um process only 1GHz
(pipeline statge =11) and Via CPU can not over 2GHz on CMOS cell limit & pipeline depth .. Pentium4 have 20 stage (K7 = 7 stage ??)
 

rfsystem

Advanced Member level 3
Joined
Feb 25, 2002
Messages
914
Helped
148
Reputation
292
Reaction score
38
Trophy points
1,308
Location
Germany
Activity points
9,550
Exact!!!

The real clock is only 1.5GHz. The call the ALU double pumped. The delay is what makes the AMD faster at regular code.
 

FFFFFF

Full Member level 1
Joined
Jul 22, 2002
Messages
96
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,288
Location
LUNAPARK
Activity points
630
cpu clock history !!

a long time a 6800 1 mhz = 5 mhz 8088 !! ( exemple the same time for execute one * nop )

after 486dx25 = similar speed equivalent to a 6800 5 mhz ???

after a 486dx2- 66 ( 2 cpu ) equivalent to one or two cpu to ???
not run exactly at same time , pipeline ... speed is ???

after after after ....the history continue

the cpu speed by intel or Amd is only a bad pub information !!!

similar problems with loudspeakers : at this time a little 10 centimeters diameter is given for 100 or 200 or 300 or 500 watts !!!!

6 * F
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top