belma1511
Junior Member level 1
Hello,
Currently I have a problem with the Insertion Loss parameter for my Wilkinson power divider. Its value is about -20dB which is way too low (expected is about -3dB). Can anyone have a look at my circuit and help me with this issue? The operating frequency is 5.5GHz and the substrate I used is FR4_epoxy (in HFSS).
View attachment Model.rar![Izrezak.PNG Izrezak.PNG](https://www.edaboard.com/data/attachments/40/40805-422e2af0af4413a13e694c881bb2ba9c.jpg)
![Izrezak1.PNG Izrezak1.PNG](https://www.edaboard.com/data/attachments/40/40806-267d866d8833e633743a8a778973a196.jpg)
Currently I have a problem with the Insertion Loss parameter for my Wilkinson power divider. Its value is about -20dB which is way too low (expected is about -3dB). Can anyone have a look at my circuit and help me with this issue? The operating frequency is 5.5GHz and the substrate I used is FR4_epoxy (in HFSS).
View attachment Model.rar
![Izrezak.PNG Izrezak.PNG](https://www.edaboard.com/data/attachments/40/40805-422e2af0af4413a13e694c881bb2ba9c.jpg)
![Izrezak1.PNG Izrezak1.PNG](https://www.edaboard.com/data/attachments/40/40806-267d866d8833e633743a8a778973a196.jpg)