I defintely will.
How about the documentation about how to insert AT commands in the application file ? Is it documented anywhere please ?
For instance, I would like to have those commands running when booting the sim900, without an arduino :
AT V1 E1 X1 S0=0
AT+CREG=2
AT+CMEE=2
AT+CR=1
AT+CRC=1
AT+CSNS=4
AT+CSMINS=1
AT+CSCLK=0
AT+CIURC=1
AT+CPIN="1130"
AT+CGEREP=2
AT+CIPMUX=0
AT+CIPMODE=1
AT+CIPCCFG=8,10,400,0
AT+CMUX=0,0,4,127,10,3,30,10,2
AT+CSTT="websfr"
AT+CIICR
And so on...
Thank you