Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Input to eload must be isolated?

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,673
Helped
54
Reputation
108
Reaction score
116
Trophy points
63
Activity points
14,079
Hi,
Please confirm, a vendor tells us that we can put the output of say a 24V non isolated offline 240VAC flyback into the siglent 1030 eload.
Please confirm that this is wrong?...mains peak is 339V above earth so thats above the outputs 150V max.
This implies it shoudlnt be done?

Siglent 1030 datasheet

Siglent 1030 user manual
 

Instrument datasheet and manual are missing specification of maximal voltage between chassis and output. Without it, it's not safe to apply higher value than 150 V maximal operation voltage.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top