Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Information about IRDA interfacing

Status
Not open for further replies.

vpsingh

Newbie level 4
Joined
May 21, 2007
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,311
hi guys
how will interfacing irda communication
 

jzo777n

Advanced Member level 4
Joined
Sep 10, 2002
Messages
112
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Location
At home
Activity points
1,056
Re: irda

Hi

From the hardware point of view you need a IRDA transciever from for.ex. Avago, Vishay etc.
If your serial port isnt IRDA compatibel i.e. 3/16 encode/decode you can use a interface chip like Avago HSDL-7002 or Vishay TOIM4243

You can find much information at www.irda.org
 

    vpsingh

    Points: 2
    Helpful Answer Positive Rating

vpsingh

Newbie level 4
Joined
May 21, 2007
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,311
Re: irda

hi jzo777n
thanks for reply
can you give circuit diagram for MCP2155(IRDA Encoder/decoder) interfaced with at89s51.
 

seadolphine2000

Advanced Member level 3
Joined
Apr 12, 2005
Messages
881
Helped
122
Reputation
244
Reaction score
86
Trophy points
1,308
Activity points
7,372
Re: irda

vpsingh wrote:
can you give circuit diagram for MCP2155(IRDA Encoder/decoder) interfaced with at89s51.

I can provide you with a circuit diagram for the MAX3131(IrDA Encoder/Decoder).

If you want it, just ask.[/b]
 

vpsingh

Newbie level 4
Joined
May 21, 2007
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,311
Re: irda

hi seadolphine2000

thanks for reply
yes i want circuit diagram for the MAX3131(IrDA Encoder/Decoder)interfaced with at89s51.

please send it
 

gramo

Newbie level 5
Joined
Mar 10, 2007
Messages
10
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Location
Australia
Activity points
1,333
Re: irda

You can just use a modified version of a software UART to do the same job, but instead it toggles the TRIS of a hardware PWM pin on a micro controller...


Depending on the receiver, upto 1200 baud is no real issue. Not sure what the TRIS is referred too on an AVR, but for a PIC it’s the input/output control of a pin
 

sukumar

Junior Member level 3
Joined
Nov 18, 2006
Messages
31
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,464
Re: irda

microchip provides many application notes, u can search in microchip site
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top