Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Info about routing constraints of FLEX PCBS

Status
Not open for further replies.

v_kumar

Full Member level 5
Joined
Jun 2, 2004
Messages
272
Helped
18
Reputation
36
Reaction score
3
Trophy points
1,298
Location
India
Activity points
1,964
Hi,
can anyone send me some documents on routing constraints of FLEX PCBS and it types are they multilayered or single etc.

Thanks & Regards
kumar
 

Rame

Full Member level 6
Joined
Dec 23, 2005
Messages
373
Helped
47
Reputation
94
Reaction score
7
Trophy points
1,298
Location
BANGALORE
Activity points
3,813
Re: flex pcb details

Hi,

Flexible pcb concept/domain is entirely different from the rigid one,few months ago we were trying out our hands on chip on board thinking that it will be easy,later it took lot of our time to know about the die,die attachment,its angle,encapsulation blah blah,term looks simple but then if you start working on that,you will know how much of work is involved,like wise flexible pcb technology is very different from the rigid one...

Anyways check this link below,maybe its helpful

https://www.allflexinc.com/DesignGuide/sing.shtml

https://www.allflexinc.com/links.shtml


Regards,

Ramesh
 

    v_kumar

    Points: 2
    Helpful Answer Positive Rating

smith_suez

Member level 3
Joined
Jun 12, 2006
Messages
67
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Activity points
1,694
flex pcb details

You can also refer PRINTED CIRCUITS HANDBOOK by Clyde f coombs.You can search the downlaod link for the e book version in this forum
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top