Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

inductor value used in microcontrollers

Status
Not open for further replies.
R

raman00084

Full Member level 6
Full Member level 6
Joined
Nov 29, 2010
Messages
375
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Visit site
Activity points
4,076
what value of inductor can i use in pic micro controller vcc and Avcc pins, is using a series inductor safe whether i must use a freewheeling diode
please help thank you
 

I usually connecting 10uH coil series and 100nF capacitor parallely to GND but only to AVCC, VCC I connecting only 100nF capacitor parallely to GND.
And this coil you'll connect without freewheel diode
Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top