Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ICprog stops after programming half of the code

Status
Not open for further replies.

tzviel

Junior Member level 2
Joined
Apr 6, 2005
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,543
I have been programming with icprog for some time.

I have incountered this week in a problem - when I program a specific program the process stops after programming about half of the code and every time in a different place (for example Error on 0x010C or other place)-there is no problem with the software or the hardware because I can program other HEX codes.

What can be the problem?

Tzviel
 

kalyanram

Advanced Member level 4
Joined
Jan 3, 2005
Messages
102
Helped
13
Reputation
26
Reaction score
4
Trophy points
1,298
Activity points
1,012
Re: Programming Error

The description seems very vague. Could you post the source code or at least describe the function i.e the required inputs-processing-output expected. BEcause this could be due to inproper pointer handling or not relinquishing the malloc ....and so on.

~Kalyan.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top