potyo
Full Member level 3
- Joined
- Apr 16, 2006
- Messages
- 181
- Helped
- 11
- Reputation
- 22
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- Ada, Vajdaság
- Activity points
- 2,225
can you damage the icd2
The 5V output signal on PGD and PGC lines is not problem for the 24F and 33F devices, but if you want to debug an 16F or 18F device running at lower voltage, you need level translators. Read my 4th post in this topic, and check my schematic here: The problem is the 5V on the mclr pin of the 24F and 33F devices.
The 5V output signal on PGD and PGC lines is not problem for the 24F and 33F devices, but if you want to debug an 16F or 18F device running at lower voltage, you need level translators. Read my 4th post in this topic, and check my schematic here: The problem is the 5V on the mclr pin of the 24F and 33F devices.