skynet
Member level 5
Hi,
I try to simulate Pulldown simulation and Ground clamp simulation, it seem that both of the waveform are look alike, I believe that my testbench to test the buffer is correct, where Ground Clamp simulation, EN=1.8, VIn=0, while for Pulldown, EN=0, VIn=0. I can't get the waveform which is similiar to the Cook book.
best regards
SkyNet
I try to simulate Pulldown simulation and Ground clamp simulation, it seem that both of the waveform are look alike, I believe that my testbench to test the buffer is correct, where Ground Clamp simulation, EN=1.8, VIn=0, while for Pulldown, EN=0, VIn=0. I can't get the waveform which is similiar to the Cook book.
best regards
SkyNet