Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I want to calculate my kernel ideal execution time with fmax.

Status
Not open for further replies.
C

chounght

Newbie level 2
Joined
May 28, 2016
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
I use DE1-SoC (Cyclone V)
and I use altera OpenCL SDK.


This is my acl_quartus_report.txt

ALUTs: 7794
Registers: 9,641
Logic utilization: 5,368 / 32,070 ( 17 % ) ( 16 % )
I/O pins: 103 / 457 ( 23 % )
DSP blocks: 0 / 87 ( 0 % )
Memory bits: 348,224 / 4,065,280 ( 9 % )
M10K blocks: 63 / 397 ( 16 % )
Actual clock freq: 135.639999807
Kernel fmax: 135.64
1x clock fmax: 135.64
2x clock fmax: 10000
Highest non-global fanout: 2723
Click to expand...


1)
I can see that Kernel fmax is 135.64.
Does this mean that fmax is 135.64MHz???


2)
my kernel make 350036 elements and work.
if I caculate kernel ideal execution time except memory load/write delay.
That is 1/135.64MHz * 350056 = 2.58ms???




Thanks,
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top